KDM20g Replacement overlay for MultiCam USA machines

OEM-specification replacement overlay for the KDM20G handheld keypad on MultiCam USA CNC cutting machines. The overlay is the printed face panel of the keypad — covering all button positions, labels and the LCD screen window.

Available in two formats — Router format (standard alphanumeric and axis layout) and Plasma/Laser format (with plasma and laser-specific function labels). Select the correct format for your machine type when ordering.

The overlay is the most commonly replaced KDM20G wear item. Signs that replacement is needed include peeling at the edges, button label wear, cracking around the E-Stop cutout, or adhesion failure around the LCD window.

For step-by-step installation guidance, see our KDM20G Overlay Replacement Guide in the Tech Hub — essential reading before attempting the replacement.

Note: If buttons have been dislodged or the intermediate layer is damaged, you will also need the Button Layer Assembly before fitting a new overlay.

Get it straight first time, and save 25%. The overlay adhesive is permanent: once it touches the board it can't be lifted and re-laid, and a crooked overlay is scrap. Our flat-pack overlay alignment jig locks the board in position so the overlay goes down right first time. Buy the jig with this overlay and you get 25% off the overlay, applied automatically at checkout.

Protect the new overlay. Most overlay damage starts with a knock or a drop. The impact-resistant TPU keypad housing fits KDM20 and KDM20G keypads and is made in Australia; fitting one with the new overlay is the cheapest way to avoid doing this job twice.